The Technical Structure-detail Design

  

  This time I studied four different types of section details. I summarized some existing detail pictures, combined them with my design, and drew the number frame, concrete frame, Masonry frame, and steel frame.

    Timber frame is easy to be corroded by water, so a waterproof layer needs to be added. And the sound insulation of wooden walls is not good, so it is necessary to add some sound insulation materials or set up sound insulation cavities. The Timber frame is unstable and needs a lot of crossbeam support.

    Concrete frame needs reinforcement as auxiliary support and will also be eroded by rain, so waterproof materials are required between walls.

    Masonry frame needs to be attached to other frames. If it is not supported, the Masonry frame is likely to collapse. In addition, the sound insulation performance of the Masonry frame is poor, so the sound insulation layer should be added.

    Steel frame is the simplest to build. The combination of welding and screws at the joint can make the connection between two steel tight.

In the updated image, the steel structure and other elements were exposed in people's sight, and I did not draw patterns on the land or some materials, which made the detailed drawings not rigorous. In the updated detail section, I annotated the data and corrected the exposed structural parts to make the entire image more visually logical.
(Picture before update)

Comments

Popular posts from this blog

Mozuna Kiko and His Grand Architectural Thought

A vent house that isolates the outside world

Tempietto